Wheels MFG Frame Drift
Bottom Bracket Frame Drift
BB Installation
Designed to press in all current Wheels Mfg bottom brackets!
Our universal bottom bracket frame drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the Compatibility tab below. Each step is laser etched with the diameter size.
Drift can also can be used as a frame bottom bracket shell sizing guide!
Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
Compatible with any other press with a 1/2" diameter rod
Recommended for use with Wheels Mfg BP0006, BP0007
Machined aluminum
Anodized Red
Sold individually
We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
- Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
- Compatible with any other press with a 1/2" diameter rod
- Recommended for use with Wheels Mfg BP0006, BP0007
- Machined aluminum
- Anodized Red
- Sold individually
Compatibility
Recommended for use with Wheels Mfg 1/2 inch rod Bottom Bracket Presses only.
Drifts fit the following BB shell sizes:
- BB30 (42mm)
- PF30 (46mm)
- BB86, BB92 (41mm)
- BBRight (46mm)
- BB386EVO (46mm)
- Cannondale BB30A (42mm)
- Cannondale PF30A (46mm)
- Specialized Carbon OSBB (46mm)
- Specialized Alloy OSBB (42mm)
- TREK BB90, BB95 (37mm)
- PF24 (41mm)
Drifts fit the following bottom bracket inner diameters:
- 37mm
- 41mm
- 42mm
- 46mm
Bottom Bracket Frame Drift
BB Installation
Designed to press in all current Wheels Mfg bottom brackets!
Our universal bottom bracket frame drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the Compatibility tab below. Each step is laser etched with the diameter size.
Drift can also can be used as a frame bottom bracket shell sizing guide!
Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
Compatible with any other press with a 1/2" diameter rod
Recommended for use with Wheels Mfg BP0006, BP0007
Machined aluminum
Anodized Red
Sold individually
We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
- Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
- Compatible with any other press with a 1/2" diameter rod
- Recommended for use with Wheels Mfg BP0006, BP0007
- Machined aluminum
- Anodized Red
- Sold individually
Compatibility
Recommended for use with Wheels Mfg 1/2 inch rod Bottom Bracket Presses only.
Drifts fit the following BB shell sizes:
- BB30 (42mm)
- PF30 (46mm)
- BB86, BB92 (41mm)
- BBRight (46mm)
- BB386EVO (46mm)
- Cannondale BB30A (42mm)
- Cannondale PF30A (46mm)
- Specialized Carbon OSBB (46mm)
- Specialized Alloy OSBB (42mm)
- TREK BB90, BB95 (37mm)
- PF24 (41mm)
Drifts fit the following bottom bracket inner diameters:
- 37mm
- 41mm
- 42mm
- 46mm
Share some information about your product
Share some information about your product
Bottom Bracket Frame Drift
BB Installation
Designed to press in all current Wheels Mfg bottom brackets!
Our universal bottom bracket frame drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the Compatibility tab below. Each step is laser etched with the diameter size.
Drift can also can be used as a frame bottom bracket shell sizing guide!
Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
Compatible with any other press with a 1/2" diameter rod
Recommended for use with Wheels Mfg BP0006, BP0007
Machined aluminum
Anodized Red
Sold individually
We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
- Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
- Compatible with any other press with a 1/2" diameter rod
- Recommended for use with Wheels Mfg BP0006, BP0007
- Machined aluminum
- Anodized Red
- Sold individually
Compatibility
Recommended for use with Wheels Mfg 1/2 inch rod Bottom Bracket Presses only.
Drifts fit the following BB shell sizes:
- BB30 (42mm)
- PF30 (46mm)
- BB86, BB92 (41mm)
- BBRight (46mm)
- BB386EVO (46mm)
- Cannondale BB30A (42mm)
- Cannondale PF30A (46mm)
- Specialized Carbon OSBB (46mm)
- Specialized Alloy OSBB (42mm)
- TREK BB90, BB95 (37mm)
- PF24 (41mm)
Drifts fit the following bottom bracket inner diameters:
- 37mm
- 41mm
- 42mm
- 46mm
Bottom Bracket Frame Drift
BB Installation
Designed to press in all current Wheels Mfg bottom brackets!
Our universal bottom bracket frame drift is designed to press all current Wheels Mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the Compatibility tab below. Each step is laser etched with the diameter size.
Drift can also can be used as a frame bottom bracket shell sizing guide!
Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
Compatible with any other press with a 1/2" diameter rod
Recommended for use with Wheels Mfg BP0006, BP0007
Machined aluminum
Anodized Red
Sold individually
We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
- Inner hole sized to fit 1/2" threaded rod. Not for use with our PRESS-1 or PRESS-4
- Compatible with any other press with a 1/2" diameter rod
- Recommended for use with Wheels Mfg BP0006, BP0007
- Machined aluminum
- Anodized Red
- Sold individually
Compatibility
Recommended for use with Wheels Mfg 1/2 inch rod Bottom Bracket Presses only.
Drifts fit the following BB shell sizes:
- BB30 (42mm)
- PF30 (46mm)
- BB86, BB92 (41mm)
- BBRight (46mm)
- BB386EVO (46mm)
- Cannondale BB30A (42mm)
- Cannondale PF30A (46mm)
- Specialized Carbon OSBB (46mm)
- Specialized Alloy OSBB (42mm)
- TREK BB90, BB95 (37mm)
- PF24 (41mm)
Drifts fit the following bottom bracket inner diameters:
- 37mm
- 41mm
- 42mm
- 46mm
Share some information about your product
Share some information about your product